Products

Products

Model: QBF (Quiet Box Fan)
Quiet Box Fan (QBF) fan design allows for supply and extract ventilation for areas/rooms with high requirements to low noise levels and limited mounting space. Units can be installed above ceilings or in loft spaces. Suitable for round ducts. The centrifugal impeller with back-curved blades is powered by means of 2-pole asynchronous motor with external rotor. The motors are equipped with built-in thermal overheating protection with automatic restart. 

Sizes/Types

100mm (4") - QBF100
125mm (5") - QBF125
150mm (6") - QBF150
200mm (8") - QBF200
250mm (10") - QBF250
315mm (12") - QBF315
Standard - S
UK Plug - Standard Model Only
Wattage
100mm (4") - 63w
125mm (5") - 63w
150mm (6") - 112w
200mm (8") - 170w
250mm (10") - 173w
315mm (12") - 221w
Air Flow (Free Air)
100mm (4") - 240m3/hr (67l/s)
125mm (5") - 330m3/hr (92l/s)
150mm (6") - 420m3/hr (117l/s)
200mm (8") - 730m3/hr (203l/s)
250mm (10") - 1300m3/hr (362l/s)
315mm (12") - 2150m3/hr (598l/s)
Sound Level dBA
100mm (4") - 33
125mm (5") - 35
150mm (6") - 36
200mm (8") - 38
250mm (10") - 41
315mm (12") - 43
Solid Flexible Ducting Extractor Fan Reducer

Please note:
Duct = same size as ducting you will need a connector to join the 2 parts together
Male = Fits into our ducting
Option 1: 5" 125mm Duct to 4" 100mm Male
Option 2: 6" 150mm Duct to 5" 125mm Male
Option 3: 6" 150mm Duct to 4" 100mm Male
Option 4: 8" 200mm Duct to 6" 150mm Male
Option 5: 4" 100mm Duct to 3" 80mm Male
Option 6: 4.33" 110mm – to 4" 100mm Male
Please Note 110mm side is ID-110 and OD-114
Option 7: diameters: 80 (3") -100 (4") -120-125 (5") -150mm (6")
Please Note this needs to be cut to size, Larger side is Duct i.e 6" 150mm smaller end is
Male i.e 3" 80mm

 

 


Model: RD (Rigid/Solid Plastic Ducting)

A full range of white solid plastic ducting. The standardisation of diameters also allows fitting to all European ventilation equipment, ducting, grilles and extractor fans.

 

With a smooth inner surface, this reduces air resistance and increases the efficiency.

 

Supplied in 100,125 and 150mm connection sizes to suit most domestic ventilation installations and cut in convenient 350, 500, 1, 1,5 and 2m  lengths.

 

Model: RDCLIP (Plastic Duct Clips)

Ducting Clips are used for fitting plastic solid ducting to a wall or ceiling.

They are robust, versatile and easy to fit.

Plastic Duct Clips are lightweight with simple to fit.

*Design may change from the picture*

Model: Roof Cowl Chimney Cap
Through the roof ventilation
110mm (4" 100mm duct pipe will fit inside 110mm Roof Cowl) different types of drain pipe might not fit inside
Bird Guard
 
Grey, White or Brown Please select above
 
** Please note that brown maybe slightly lighter then picture **

 

SA Extractor Fan Range Bathroom

SA is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwated drafts from entering from outside.

IP Rating: IP24


Types/Spigot Size

SA100 - 100mm (4")
SA125 - 120mm (5")
SA150 - 150mm (6")

Standard Model (S) - Turns On/Off 

Timer Model (T) - When switched off will run on for the time set

Humidity Model (H) - Turns on and off with Humidity - If Switched Live is added fan will turn on for the time set then off (even if power is still applied to T Terminal) once light is turned off fan will run again for the time set then off.

Pull Cord (P) - Turns On and Off via the Pull Cord attached to fan, Perm LIve and Neutral Needed

 



Wattage
100 - 14w
125 - 16w
150 - 16w
Air Flow (Free Air)
100 - 97 m3/hr
125 - 183 m3/hr
150 - 290 m3/hr
Sound Level dBA (3m)
100 - 35
125 - 36
150 - 38

Model: SAGRM (Gravity Flap Cover)
Gravity Grille for our plate fans 200mm to 400mm
Application
Exhaust ventilation, heating and air conditioning networks in industrial, commercial and domestic premises.
Model: SAHRU150 (Passive Heat Recovery)
Designed to work with inline fans already installed or purchased separately.
This will then provide adequate ventilation for rooms and will provide up to 75% heat recovery.

Eliminate mould and control condensation.
Spigots
6" 150mm


Model: SAS (Automatic Shutter Extractor Fan)

A distinctive feature of the SAS fan is the automatic shutters (Please allow 40 secounds to open and fully close).

This design is necessary to combat reverse traction and is indispensable for rooms where regular, but not constant ventilation is needed.

SAS is also has other options: timer & humidity sensor. 

This will help the unit with changes within the room and respond.

IP Rating: IP24



Types/Spigot Size

SAS100A - 100mm (4")
SAS125A - 120mm (5")
SAS150A - 150mm (6")

Standard Model (S) - Turns On/Off 

Timer Model (T) - When switched off will run on for the time set

Humidity Model (H) - Turns on and off with Humidity - If Switched Live is added fan will turn on for the time set then off (even if power is still applied to T Terminal) once light is turned off fan will run again for the time set then off.

Wiring diagram 


Wattage
100 - 11w
125 - 15w
150 - 29w
Air Flow (Free Air)
100 - 85 m3/hr
125 - 130 m3/hr
150 - 230 m3/hr
Sound Level dBA (3m)
100 - 39
125 - 42
150 - 46
Model: SCT (Continuous Eco dMEV)

Swiftair 4"/5” Axial Continuous Running Fan SCT

 

100mm / 125mm continuous running panel axial fan for bathrooms and kitchens.

Discreet styling with flat facia reducing the impact the fan has on interior design.

Suitable for wall or panel mounting using the appropriate fixing kit.

Designed to comply with Building Regulations for whole house system ventilation, this sleek fan can be used in a wet room under System 3 of Building Regulations Approved Document F.

This attractive fan is also very energy efficient.

 

Why choose continuous running fans?

Continuous running fans, like the Continuous range, have been designed to meet the requirements of the Building Regulations for bathrooms, kitchens, utility rooms and toilets (other models available).

The fan is designed to run all of the time, keeping homes fresh, healthy and free from condensation.

 

What does it do?

The fan is designed to run continuously at a very low rate and boost automatically when required.

The low running rate means it has extremely low noise levels.

 

How will it help?

This fan will help prevent the build up of moisture in the home by removing steam and odours.

This will help reduce the risk of black mould forming on walls and behind cupboards.


220-240 V/AC. 50Hz single phase powering a low energy motor.

These fans are double insulated and do not require an earth.

All wiring must comply with current IEE regulations.

 

IP Rating

IPX4


Types/Spigot Size

SCT100 - 100mm (4")

SCT125 - 120mm (5")


Models - Timer (T) & Humidistat (H)

Wattage

100 - 4/6w

125 - 6/8w


Air Flow (Free Air)

100 - 42/70 m3/h

125 - 55/100 m3/h


PA

100 - 11/15

125 - 6/12


Sound Level dB(A)

100 - 26/32

125 - 24/32


 

Standard

The standard fan can be connected in two ways:

Continuous operation: In this mode, the fan will always be on. The second gear can be turned on and off using a separate switch installed in the power line.

Switchable: In this mode, the fan can be turned on and off completely. To do this, use a double switch, where each key controls a different gear.

 

Timer

Fans with a timer (T) can be connected in the same two ways as the standard fan. In addition, the timer allows you to set the fan to turn off after a certain amount of time. The default setting is 30 minutes, but this can be changed.

 

Humidity

Fans with a humidity sensor (H) will automatically switch to the second gear when the humidity level in the room exceeds 70%. The fan will switch back to the first gear after 15 minutes if the humidity level drops below 70%.

 

PIR

Fans with a motion sensor (R) will automatically switch to the second gear when they detect movement in the room. The fan will switch back to the first gear after 15 minutes if the motion sensor does not detect any movement.

 

Model: SD (Roof Fan with Cowl)

Main features:

  • ABS plastic
  • ball bearings
  • IPX4
  • maximum operating temperature 40°C
  • 1 years warranty

SD-series roof fans are designed for ventilating utility buildings, as well as warehouses with a low level of air pollution.

Fans designed for vertical operation are adapted for installation on roofs with a maximum pitch of 15°.

They have a much-higher compression than traditional fans, so they can work with central exhaust-ventilation systems.

Thanks to the use of 3-speed motors, it is possible to adjust the fan’s parameters to the user’s needs, depending on the connection method.

SDISC Extractor Fan

SDISC is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwated drafts from entering from outside.

It comes with 4 coloured rings - White, Red, Green, Yellow & Blue 

IP Rating: IPX4


Types/Spigot Size

SDISC100 - 100mm (4")


Standard Model (S) - Turns On/Off 

Timer Model (T) - When switched off will run on for the time set

Humidity Model (H) - Turns on and off with Humidity - If Switched Live is added fan will turn on for the time set then off (even if power is still applied to T Terminal) once light is turned off fan will run again for the time set then off.

Wiring diagram 


Wattage
100 - 17w
Air Flow (Free Air)
100 - 105 m3/hr
Sound Level dBA (3m)
100 - 35
Model: SEFC Controllers (Single Phase)

Our range of electronic fan speed controllers designed for speed controllable single phase motors up to 16 amps. 


- All Have Rocker Switch (On/off)

- Stepless Rotary Knob

- Suitable for 2 or 3 wire control

- Easy To install

Model: SF (Inline Fan)

The SF range is an inline Axial Fan perfect for small carbon filters or just as a supply/extract fan. This model has a Bracket attached

 

UK Plug - No

 

Sizes/Types

100mm (4") - SF100

125mm (5") - SF125

150mm (6") - SF150

Timer - T

Standard - S

Wiring Diagram

 

Wattage

100mm (4") - 15w

125mm (5") - 20w

150mm (6") - 25w

 

Air Flow (Free Air)

100mm (4") - 100m3/hr (28l/s)

125mm (5") - 150m3/hr (42l/s)

150mm (6") - 210m3/hr (59l/s)

 

Sound Level dBA

100mm (4") - 30

125mm (5") - 32

150mm (6") - 35

Model: SFP (Plate Fan)
The SFP range is a Commercial Plate Axial Fan perfect for Kitchens, Warehouses, Sports halls, and large areas where high extract rates are needed a low pressure
The SFP Comes in various sizes ranging from 230mm to 480mm

Types/Spigot Size

SFP200 - 230mm
SFP250 - 280mm
SFP300 - 330mm
SFP350 - 380mm
SFP400 - 430mm
SFP450 - 480mm


Pole

SFP200 - 2 Pole

SFP250 - 2 Pole

SFP300 - 2 Pole

SFP350 - 4 Pole

SFP400 - 4 Pole

SFP450 - 4 Pole

 

Wattage

SFP200 - 55w (0.25 A)
SFP250 - 80w (0.36 A)
SFP300 - 145w (0.66 A)
SFP350 - 135w (0.61 A)
SFP400 - 180w (0.82 A)
SFP450 - 250w (1.14 A)
Air Flow (Free Air)
SFP200 - 890 m3/hr
SFP250 - 1100 m3/hr
SFP300 - 2300 m3/hr
SFP350 - 2600 m3/hr
SFP400 - 3830 m3/hr
SFP450 - 4800 m3/hr
Sound Level dBA (3m)
SFP200 - 50
SFP250 - 60
SFP300 - 61
SFP350 - 62
SFP400 - 63
SFP450 - 64
Model: SI (Inline Fan)
The SI range is a compact inline Axial Fan perfect for small carbon filters or just as a supply/extract fan.
Spigots
The SI Fan has different inlet and outlet spigot diameters to enable attachment to a carbon filter with the outlet side  attaching to your ducting. 
UK Plug - EU/UK plug attached  
Sound Level dBA
100mm (4") - 35
125mm (5") - 36
150mm (6") - 38

Sizes/Types

100mm (4") - SI100
125mm (5") - SI125
150mm (6") - SI150
Timer - T
Standard - S
Wattage
100mm (4") - 14w
125mm (5") - 18w
150mm (6") - 22w
Air Flow (Free Air)
100mm (4") - 107m3/hr (30l/s)
125mm (5") - 190m3/hr (53l/s)
150mm (6") - 270m3/hr (75l/s)
Model: SilverDia (Silver Diamond Sheeting 1.2m)

Silver Diamond

Product Specification:
Diamond diffused pattern to spread light more evenly. Produced to help eliminate grow room hot spots.

PET coated to protect against corrosion and wear.

With "Membrane Memory" to dramatically reduce creasing effect.

Model: SL (Shower Light Grille)

Grille and light (optional white or chrome bezel included) with a built in LED Light (1.5w or 3w)

 

Fitting

Remove the Chrome/White part of the grille to show four fixing holes. Cut a hole in your ceiling and push the grille through.

Connect duct to the back of the grill.

Twist fit your Chrome/White bezel

Must Use a qualified electrician to wire to transformer/driver (provided).

 

Where to fit?

Grille/light can be mounted within the splash zone due to being 12v

Perfect for mounting directly over a shower or bath.

 

Light Fitting

4" - 3w LED MR16 - Cool White

5" 6" - 1.5w LED MR16- Cool White

4
Back Flow/ Back Draught Valve/Shutter for domestic axial fans with flange diameter of 100, 125 and 150 mm.
It provides protection against all kinds of odours that may filter through. 
Model: SL100TWC (Inline Fan Light Kit)
SF100 Fan is designed for the safe ventilation of bathrooms, toilets and shower rooms, these 100mm (4") in-line extractor fans remove any risk of an electric shock in wet areas as the fan is mounted remotely, all SL100TWC fans come with timer.
 
Powerful, yet extremely quiet in operation, the extract rate is 100m³/hr (28 ltr/sec).
 
Available with timer, the fan kits are supplied complete with fan unit, one length of PVC flexible ducting 3m, one internal Grille and one external white wall grille, fixing screws, plugs and straps to secure the duct and the grilles.
 
The internal light grille comes with a white and chrome bezel that is easily changeable by twisting off.
LED drive is also include to power the 3w LED MR16 12v Bulb
 
Sizes/Types
100mm (4")
Timer - T
Wattage
100mm (4") - 15w
 
Air Flow (Free Air)
100mm (4") - 100m3/hr (28l/s)
 
Sound Level dBA (3m)
100mm (4") - 30

 

Model: SNB (White Extractor Fan)

The SNB range is designed to complment stylish bathrooms, with an unobtrusive, sleek design.

IP Rating: IPX4

Types/Spigot Size

SNB100 - 100mm (4")

Models - Timer (T) & Humidistat (H)

Wiring diagram 

Wattage
100 - 13w
Air Flow (Free Air)
100 - 88 m3/h

Sound Level dBA (3m)
100 - 37
PA
38


Model: SNI (Brushed Extractor Fan)

The SNI range is designed to complment stylish bathrooms, with an unobtrusive, sleek design.

IP Rating: IPX4

Types/Spigot Size

SNI100 - 100mm (4")

Models - Timer (T) & Humidistat (H)

Wiring diagram 

Wattage
100 - 13w
Air Flow (Free Air)
100 - 88 m3/h

Sound Level dBA (3m)
100 - 37
PA
38


Model: SR (Semi Rigid Ducting)

An extremely flexible reinforced aluminium foil flexible supply or extract ventilation ducting.

Multi-ply aluminium and polyester laminate construction supported by a high tensile steel wire helix.

 

Model: SRD (Round Extractor Fan)
For constant or periodic exhaust ventilation of bathrooms, kitchens and other domestic compartments.

Case and impeller are made from the high-quality ABS-plastic, resistant to ultraviolet.

The motor is equipped with overheating protection.

Fixing to the mounting place is carried out by means of screws.

Types/Spigot Size

SRD100 - 100mm (4")
SRD125 - 125mm (5")
SRD150 - 150mm (6")

Models - Standard (S) & Timer (T)

Wiring diagram 


Wattage
SRD100 - 14w
SRD125 - 18w
SRD150 - 22w
Air Flow (Free Air)
SRD100 - 107 m3/hr
SRD125 - 190 m3/hr
SRD150 - 270 m3/hr
Sound Level dBA (3m)
SRD100 - 35
SRD125 - 36
SRD150 - 38
Model: ST (Centrifugal Inline Fan)
The ST range is an inline Centrifugal Fan with attached bracket which can be used for supply or extraction.
This fan is perfect for longer duct runs and carbon filters.
UK Plug - Standard Model Only

Sizes/Types

100mm (4") - ST100
Standard - S
Wattage
100mm (4") - 20w
Air Flow (Free Air)
100mm (4") - 110m3/hr (30l/s)
Sound Level dBA
100mm (4") - 35
Model: STUBE P (Plastic Centrifugal Inline Tube Fan)
Designed for inline mounting into any point of the ventilation system and at any angle. For supply and exhaust ventilation, The fan casing is made of high quality durable plastic.
Single-phase ball bearing motor equipped with a centrifugal impeller with backward curved blades. It is implemented with overheat protection with automatic restart.
Wall and ceiling mounting is carried out using the bracket
Can be speed controlled using a thyristor or transformer speed regulator.
IP44

Sizes/Types

100mm (4") - STUBE100P
125mm (5") - STUBE100P
150mm (6") - STUBE100P
200mm (8") - STUBE100P
250mm (10") - STUBE100P
315mm (12") - STUBE100P
UK Plug - No
IEC Attachment - Yes (UK Plug lead not provided)
Wattage
100mm (4") - 52w
125mm (5") - 52w
150mm (6") - 85w
200mm (8") - 135w
250mm (10") - 210w
315mm (12") - 225w
Air Flow (Free Air)
STUBE100 - 265 m3/h
STUBE125 - 370 m3/h
STUBE150 - 680 m3/h
STUBE200 - 900 m3/h
STUBE250 - 1100 m3/h
STUBE315 - 1700 m3/hr
Sound Level dBA
100mm (4") - 52
125mm (5") - 51
150mm (6") - 57
200mm (8") - 55
250mm (10") - 53
315mm (12") - 53
Sold Out
Because of the metal casing there the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

A dynamic balanced impeller with backward curved blades balanced in two planes.
Overheating protection with automatic restart.

Maintenance-free ball-bearings used with motors and designed for at least 40000 hours operation.

Sizes/Types

100mm (4") - STUBE100-R2
125mm (5") - STUBE100-R2
150mm (6") - STUBE100-R2
200mm (8") - STUBE100-R2
250mm (10") - STUBE100-R2
315mm (12") - STUBE100-R2
UK Plug - Yes - with wired Controller
Wattage
100mm (4") - 68w
125mm (5") - 70w
150mm (6") - 125w
200mm (8") - 160w
250mm (10") - 165w
315mm (12") - 165w
Air Flow (Free Air)
STUBE100 - 300 m3/h
STUBE125 - 400 m3/h
STUBE150 - 600 m3/h
STUBE200 - 900 m3/h
STUBE250 - 1000 m3/h
STUBE315 - 1500 m3/hr
Sound Level dBA
100mm (4") - 49
125mm (5") - 49
150mm (6") - 49
200mm (8") - 51
250mm (10") - 52
315mm (12") - 53
Model: STY (Wall/Ceiling Extractor Fan)

STY is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwated drafts from entering from outside.

IP Rating: IP24


Types/Spigot Size

STY100 - 100mm (4")
STY125 - 120mm (5")
STY150 - 150mm (6")

Standard Model (S) - Turns on and off, Live and Neutral needed

Timer Model (T) - When switched off will run on for the time set

Humidity Model (H) - Turn on and off with Humidity if Switched Live is added fan will also turn on and off with switch. 

Humidity can be wired to just work with humidity if needed



Wattage
100 - 14w
125 - 16w
150 - 16w
Air Flow (Free Air)
100 - 100 m3/hr
125 - 183 m3/hr
150 - 290 m3/hr
Sound Level dBA (3m)
100 - 32
125 - 36
150 - 38

Model: SVU400HT MEV (Whole House Extract Unit)

The SVU400 central fan is designed for the continuous and quiet ventilation of rooms. It can be used in houses and flats, as well as in conference rooms, offices and public buildings.

The unit is equipped with an energy-saving motor, which enables operation at three performance levels. Its construction allows the connecting of up to seven inlet ducts with a diameter of Ø75 mm, and one Ø125 mm duct intended for connecting a extractor hood.

The CVU400 is comes with humidistat, which automatically adjusts the efficiency of the fan to the prevailing humidity. The simple device design allows for its quick installation and maintenance (cleaning) without using complicated tools.

The design of the CVU central fan allows it to be mounted on the wall or ceiling in both horizontal and vertical positions.

 

The humidity sensor has an operating range of 0% to 100%. The humidity level should be adjusted on the front part of the fan casing. The fan will start in trickle. When the humidity rises above the value set, the fan will automatically increase the speed to Boost (Full Speed). After the humidity drops below the set value, the fan will return to operation in trickle.


Wattage
54/55/60

Air Flow (Free Air)
Speed 1 – 265 m3/hour
Speed 2 – 360 m3/hour
Speed 3 – 415 m3/hour
PA
435/495/535

Sound Level dBA
44/49/56 dB(A)
IP
X2
Model: SW-AD (Door Hatch)
For access to fans, pipes or any items that require to be hidden.
Designed for wall or ceiling mounting.
Open and close by press.
The possibility of universal installation for the left or right-side opening.
Can be used in high-humidity.
Made of high-quality ABS-plastic.

SW-AD1515 - 168 x 168mm (Door Dimensions 146 x 146)
SW-AD2020 - 218 x 218mm (Door Dimensions 196 x 196)
SW-AD3030 - 318 x 318mm (Door Dimensions 296 x 296)
SW-AD3535 - 368 x 368mm (Door Dimensions 346 x 346)

Thickness - 24mm (including flange)

Mounted with glue or cement

Colour: White
Model: SW-ANTIDETECT (Anti Detection Foil ADF Sheeting)

Benefits:

 

88% Light reflection
94% Heat reflection
100% moister proof
100% light proof
Certificate on light and heat reflection: TNO Official Dutch research institute.
Tear proof product
Extra coating
Model: SW-APOLLO (Fold LED 720w 2.5uml/s / 1800 µmol/s)

Swiftair Apollo Fold 6 Bar Grow light Full Spectrum 720w 2.5 uml/s

In the box:
Apollo Fold LED 720w x 1
UK IEC Lead x 1
RJ14 Network Cable x 1
Rope Ratchets (Pair) x 2

With the advances in technology and fixture performance, high quality LED lighting is now a option offering significant return. 

The array of LEDs create a uniform spread of light at short distance from the crop enabling good penetration without hotspots and excessive heat. 

 Can be used folded making this LED brilliant in corners and getting that light on the sides as well as on top, it can also be folded to a V making it ideal for any roof/loft .

Introducing our new and improved folding 720W LED lighting fixture, Our new LED features the same outputs that made the original our most successful LED unit.

With a PPF of 1800 μmol/s and a fixture efficiency of 2.5 μmol/J, you can expect the same quality of light and improved yield as the original.

It’s 6 bars of high-efficiency LEDs cover a 1.5m x 1.5m area, with outstandingly uniform light coverage.

  The ‘fanless’ design means the unit is silent and has no mechanical parts, hugely reducing the risk of failure.

Backed up by a Two year warranty.

 Total output: 1800 µmol/s

Overall fixture efficiency: 2.5 μmol/J

Diodes - (3V 2835)

 6 bar system – Gives highly uniform coverage (PPFD) across the canopy.

Ideal over a 1.5m x 1.5m area, However for best results use a area of 1.2m x 1.2m

 Full spectrum: Full-bodied, enhanced red spectrum improves plant growth and flowers.

  Silent running: No fans or moving parts.

 Dimming Settings: 290, 430, 580, 720w & EXT (Controller)

 

Spec's

Full Spectrum

720w

Efficacy: 2.5 µmol/J

PPF: 1800µmol/s

Input Voltage: 120-240V, 50-60Hz

Power Consumption: 720w

LED Wattage: 720w

IP54

Used semi folded - Yes

Lifetime: 50 000 hrs @ 60 C

Light Distribution: 120°

Weight: 14Kg

Dimensions: 112 x 112 x 6 cm

Model: SW-APOLLO-CLONE - Twin Pack (25w T5 CLONE LED)
The 25w Clone LED is the perfect replacement for a T5 fluorescent light fixture. The 25w Clone LED is 60% more efficient running off 25 watts, splashproof, and is rated for 54,000 hours. 2 strips per pack. 

Color Temperature: 9000 Kelvin
39.6 umol
Beam Angle: 120*
Water resistant housing and connectors
25W per strip
Daisy chain up to 50 strips 
Two strips in array per shelf
2.4 umol/j
Dia - 112 x 3.5cm
Model: SW-ATRIM-18 (Table Leaf Trimmer)
This handy 18" leaf trimmer goes together easily. 
Simply insert the legs into the holes provided and attach the mesh catch bag, plug in, and it is ready to use.

Please make sure you wear safety eye wear and tight gloves when operating.

This trimmer has sharp rotating blades that may, through carelessness cause injury to fingers.

Easy to put together & even simpler to use
A quick & effortless way to trim
Compact design only requires 4ft of space
Easily accessed for maintenance
Equipped with a Powerful, efficient and quiet motor

220-240v 50Hz

Designed with auto-shut off when cutting box is opened
Model: SW-BTRIM-16 (Bowl Trimmer)
This trimmer is medium sized (16") with stainless Steel Construction

Helps with trimming roots and leaves 
Can be rotated clockwise and anti-clockwise
Can be dismantled to take up less space 
Easy cleaning
Light weight
Easy to use and carry

Size - 16"
Total dimensions 405 x 400 x 360mm
Weight - 6kg
Model: SW-CARBON (Carbon Filter)
Using High Quality Carbon, SwiftAir range of filters are designed with the grower in mind.
This means they are perfect for the job, easy-to-use, value for money and flexible to suit your needs.

38mm Carbon Bed
100mm x 200 38mm - 255m3/hr
125mm x 400 38mm - 350m3/hr
150mm x 500 38mm - 500m3/hr
200mm x 800 38mm - 1000m3/hr
50mm Carbon Bed
250mm x 1000 50mm - 2300m3/hr
315mm x 1000 50mm - 2850m3/hr
Model: SW-CHIMSS (Metal Chimney Hood)

Manufactured from galvanized steel. 

Please adhere to building regulations or consult a qualified professional for suitability and specific installation guidance. 

Model: SW-CLHOOD (Cool Hood Reflector)
The Cool Hood reflector is sealed with slide-in gasketed glass constructed with heavy duty pre-galvanized steel

-Made from premium highly reflective aluminum
-pre-wired lamp cord
-Comes with built-in socket, and hanging hooks
-Can be connected straight to a Ballast
-Bulb in picture not included

Spigot Size - L x W x H

150mm (6")  - 59cm x 42.5 x 18cm
Wattage
250w, 400w & 600w

Bulb Fitting

E40 Screw Fitting
Model: SW-COMBI (Combi Ducting)
Combi is used in heating, cooling, ventilation systems and is made of steel wires.
Its inner and outer surfaces are coated with aluminum and PVC.

Intended for medium and low pressure environment.


Model: SW-CONAVM (Anti Vabrite Connector)

CONAVM flexible insert is designed to eliminate vibrations in ventilation systems that occur during the operation of air handling units and other devices connected to air ducts and fittings.

CONAVM is made of galvanized steel and polymer fabric, it is operated at temperatures from -40 to +50 degrees.

Boat Caravan DC extractor Fan SW-DC BSL112 BSL LED Light
A space-saving extraction fan with an optional integrated LED light.
Suitable for marine and leisure applications, this fan is ideal for installation in galleys, showers, and restrooms. It includes a long-lasting motor that can operate continuously.
Both the fan and light can be switched on simultaneously or independently, offering effortless installation and maintenance.
Wall, ceiling, and panel mounting  available.

Sizes/Types

100mm (4")

Wattage
12v - 3.7w
24v - 4.8w
LED
1.5w - Cool White supplied - with light option only 
Air Flow (Free Air)
64m3/hr (18l/s)
Sound Level dBA
100mm (4") - 35

Sold Out
Double ended Dual Spectrum HPS bulb 240v - 1000w 
High output with raised spectral discharge in the reds and blues (exactly the right spectral energy distribution curves that your plants need to thrive).
The lamp also has 10,000 life hours and colour temperature of 2100K.

1000w = 151,000 Lumens

Best used with our FlexStar ballast
DE fitting

Codes

SW-DEHPS-1K
Model: SW-DIG (Digital Ballast)
Our 600w Digital Ballast is supplied as a stand-alone ballast with a flying IEC lead.

The ballast features dim and boost functions, giving you the ability to control the light output from your lamp to your plants. 

The dimmable options are 250w, 400w, 600w and a boost option which is on average a 10% increase in output.

Types

Digital
Wattage
250w 400w 600w & Boost 

Bulb Options

Can be used with MH or HPS
UK Plug - UK plug (Supplied)
Model: SW-FABRIC (Fabric Pots)

Fabric Pots

Fabric Pots are a great eco-friendly alternative to standard plastic pots and are suitable for any style of growing.

Fabric pots achieve superior drainage and aeration by air pruning the plants’ roots. This allows them to form multi-branched roots, making stronger and more efficient root systems, and alleviating the problem of root-circling, which is often found when using traditional plastic pots. The lightweight fabric material promotes aeration which allows the roots to become stronger, and results in stronger plants, guaranteed! 

Fabric Pots are practical due to the variety of sizes, and suits almost all types and sizes of plant. The sizes are available from 1 litre, all the way up to 39 litres.

Fabric Pots are the number one choice for fabric containers in the hydroponic industry, as well as being an environmentally friendly option, and a great alternative to plastic pots. 

 

 

Model: SW-FLANGE (Plastic Flange)
Plastic wall or ceiling mounted flange

Model: SW-FLEXII (Double Ended Light Fitting)
DIMMABLE BALLAST - 600w, 750w, 1000w or 1150w

3-Mode adjustable reflector

Narrow, Medium or Wide

Hammered surface design to ensures the best light output

This double ended ballast and reflector has been made to provide the best possible spread of light over the growing area. 

The FlexStar is a digital ballast that powers a double ended 1000w lamp (lamp not included). 


Types

Digital / DE
Wattage
600w, 750w, 1000w or 1150w

Bulb Options

DE Bulb 1000w
UK Plug - UK plug (Supplied)
Model: SW-FLG (Flat Metal Fixed Grille)
Supply and Exhaust for residential ventilation, air conditioning and air heating systems and industrial.
External or Internal mounting 
Can be used as an outside air brick
FlyScreen attached
Fixed with screws.

SW-FLG1212 - (125x125mm)
​SW-FLG1515 - (150x150mm)
SW-FLG2020 - (200x200mm)
SW-FLG2525 - (250x250mm)
SW-FLG3030 - (300x300mm)

Available in White (WH), Steel (ST), Brown (B)
Model: SW-HELIOS 110w Quantum Board (Full Spectrum LED 2.7umols)

Helios is a Full Spectrum (Sunlight) and High PPF for the whole stage of plant growth from Veg to Bloom.

 

- Perfect up to a 60x60 grow area 

- 2.7umols (PPF 300+5%)

- Dimmable 

- 110w

- 240mm x 300mm (24cm x 30cm)

- IP65

- Linkable with Ethernet for dimmable across all lights 

- Ratchets & Straps included 

 

 

 

  


Model: SW-HPS (HPS Bulb)
Sodium HPS offers exceptionally high output with raised spectral discharge in the reds and blues (exactly the right spectral energy distribution curves that your plants need to thrive).
This lamp also has 32,000 life hours and colour temperature of 2000K.

250w = 33000 Lumens
400w = 50000 Lumens 
600w = 90000 Lumens

Spectral output changes in a HPS lamp as it ages. We recommend changing your lamp every 9-12 months for optimum growth conditions

E40 Screw in Fitting

Codes

SW-HPSD-250W
SW-HPSD-400W
SW-HPSD-600W
Model: SW-HRISE (High Rise Ducting kit)
Supply and Exhaust residential ventilation, air conditioning and air heating systems.

Easy to fit when high up without the need to go outside.

Available in White, Brown, Terracotta, Beige, Black and Grey


Login