Products

Products

Chaos (30% Booster)

Chaos from Swiftair is the formless matter supposed to have existed before the creation of the universe. 

Fortunately, the only creation this booster will be part of is the battle to create excessive amounts of weight to your crop.

A blooming formula (for weeks 6-7)

Plant-sourced amino acids, humates, lignins and sugars to enhance yield, health and flavour.

Specifically designed for use late-on in the growing cycle, it stimulates bulking up of flower components over their final 3 week.

Based on plant extracts without artificial PGRs. Using bioactivated Potassium in both Thiosulphate and Phosphite forms, combined with specific amino acids and other plant extracts.

 

Benefits

Late Mass builder.

 Plant booster.

 Increases yield up to 30%.

 

Directions:

Ensure all equipment is CLEAN and free of residues from previous use.

SHAKE OR STIR THOROUGHLY before SLOWLY adding the required quantity to fresh solution.

MIX WELL before use and make up a solution for one week’s use, then top up as necessary.

 

Application:

Use only in either week 6 or 7 of flowering:

Use 2ml/L - for 1 week only.

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

N – 7.1%

P2O5 – 4%

K2O – 8%

MgO – 2.0%

Amino Acids – 2.3%

Lightning Roots (Root Stimulator)

Supercharge your roots with Lightning Roots!

Turbo-charged formula to speed-up root growth with increased water & nutrient uptake thanks to longer, heavier and more efficient roots.

Lightning Roots uses entirely natural components to tilt hormone production in favour of root growth.

Bigger roots take up nutrients more efficiently, absorb water more effectively and provide better anchorage for your plant.

A safe, natural material that’s based on plant extracts – without artificial PGRs. Its oligosaccharides work in conjunction with other sugars and amino acids to stimulate your plant’s root zone.


Benefits

Increase stress resistance.

Epic root growth.

Faster growth development.


Directions:

Ensure all equipment is CLEAN and free of residues from previous use.

SHAKE OR STIR THOROUGHLY before SLOWLY adding the required quantity to fresh solution.

MIX WELL before use and make up a solution for one week’s use, then top up as necessary.

 

Application:

Weeks 1-4 (Veg)

Weeks 1-2 (Flower)

1ml/L

 

You can use beyond if needed

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

0.15% Amino Acids

8.6% Plant extracts

0.9Lignin salts

3%Glucose surfactant

0.5% Glycerol

Humic Acid<0.1%

Lignosulphonates 0.8%

Model: 15D (Plastic 15 Degree Bend)

15 Degree Bend

Spigots
Male - Fits into ducting but will need a small amount of duct to connect to male ends 

Duct - Will need a connector if connecting to duct

Colour: White
Max / Min Temp: +60°c to -15°C

45 degree bend
45 Degree Bend
Colour: White
Max / Min Temp: +60°c to -15°C
Model: 90D (Plastic 90 Degree Bend)
90 Degree Bend
Colour: White
Max / Min Temp: +60°c to -15°C
Model: AG (Plastic Air Valve)

The AG is a universally applicable air valve. Because of the materials used, the AG is very suitable for use in (very) wet areas like kitchens, bathrooms, etc.

 

Step less air volume control

High valve body with spring attachment for proper airflow and less noise

Closed adjustment disk

Mounting collar adapted for suspended ceilings

Great air tightness between diffuser body and mounting collar

Unique sealing system between mounting collar and clamping ring

Suitable for both supply and exhaust air

 

Model: AG BS (Brushed Steel Air Valve)

The AG is a brushed stainless steel air valve with infinitely adjustable scale, suitable for rooms with high humidity, eg kitchens and bathrooms.

 

Step less air volume control

High valve body with spring attachment for proper airflow and less noise

Easy to remove for cleaning

Mounting collar included

Suitable for both supply and exhaust air

 

Model: AG FR (Fire Rated Air Valve)

The Fire Rated Ceiling Valves have been fire tested to BS EN 1365-2:1999 by The Building Test Centre in a full scale horizontal loaded timber joist floor and the ceiling and floor construction with the valves installed, achieved a Fire Rating of over 60 minutes.

 

The full Test Report BTC 18074F is available to download from our website, together with a Technical Data Sheet and Installation Guide for the Ceiling Valves.

 

The Fire Rated Ceiling Valves are available in both Supply and Exhaust configurations and incorporate integral intumescent materials. During a fire, the intumescent material expands and closes the aperture of the valve, re-instating the fire resistance of the structure.

 

Suitable for both supply and exhaust air

 

Model: AG METW (Metal Air Valve)

The AG METW is a universally applicable air valve. Because of the materials used, the AG METW is very suitable for use in (very) wet areas like kitchens, bathrooms, etc.

 

Step less air volume control

Closed adjustment disk

Great air tightness between diffuser body and mounting collar

Suitable for both supply and exhaust air

 

Model: ALU (Aluminium Flexible Ducting)

An extremely flexible reinforced aluminium foil flexible supply or extract ventilation ducting.

Multi-ply aluminium and polyester laminate construction supported by a high tensile steel wire helix.

 

Model: BD-CON (Plastic Back Draught Shutter)
Round Back Draught Shutter Connector
Colour: White
Max / Min Temp: +60°c to -15°C
Model: CFLO100 (Small Heat Recovery Unit)
Designed to run continuously and provide adequate ventilation for a bathroom, en suite, shower room, wet room. Will provide up to 75% heat recovery

Eliminate mould and control condensation perfect for rented (Buy to let) properties 

Condensation Drain fitted to bottom of Unit

Comes pre wired to a trickle and boost switch
Spigots
4" 100mm
UK Plug - UK plug attached

Wattage
Boost - 25w
Trickle – 20w

Air Flow (Free Air)
Boost – 100 m3/hour
Trickle – 30 m3/hour

Sound Level dBA
33dB(A) - High Speed
Model: CFLO250 (Large Heat Recovery Unit)
Boost switch comes wired to unit (plug straight in)

Designed to run continuously and provide adequate ventilation for a bathroom, en suite, shower room, wet room etc.

Will provide up to 75% heat recovery

Controller is wired to 2 Speeds for trickle and boost

Eliminate mould and control condensation
Trickle/Boost Option included
Loft/void space mounting.

Condensation Drain fitted to bottom of Unit
Spigots
6" 150mm 
UK Plug - UK plug attached  

Sizes/Types

150mm (6")

Wattage
Speed 1 - 120w
Speed 2 - 106w
Speed 3 - 93w
Speed 4 - 80w
Speed 5 - 65w
Speed 6 - 53w
Speed 7 - 39w

Air Flow (Free Air)
194m3/hr to 550m3/hr

Sound Level dBA
speed 1 : 54dB(A)
speed 2 : 52dB(A)
speed 3 : 47dB(A)
speed 4 : 43dB(A)
speed 5 : 38dB(A)
speed 6 : 34dB(A)
speed 7 : 28dB(A)
Worm Drive Jubilee Hose Clips Pipe Clamps
Type: Worm Drive Jubilee Hose Clips Pipe Clamps
 
Features:
1. Quick release stainless steel hose clamps.
2. Just release the tension on the screw and flip up to instantly release the clamp.
3. Quick and easy to use to attach fans and filters to ducting and reducers as needed.
4. Also allow for easy removal of the clamp for quicker flex duct removal when cleaning the glass in your air cooled fixture or accessing your lamp.
Model: FP-CLAMP (Padded Collar/Clamp)

4", 5", 6", 8", 10", 12" Padded Clamps (Collars)

Fast Clamps are perfect for connecting fans, carbon filters, silencer and rigid ducting.

The metal band has a foam lining so reduces fan vibration.

If you need to connect your fan directly to filter for example it's much better to use a padded fast clamp than an connection method such as duct tape.

Heat and humidity in your grow area can often cause duct tape to peel meaning it must be replaced.

Pull out eyelets for easy hanging.

Model: HerbDryer (Built-in Fan Odour Control Dry Net)

Herb Dryer allows you to easily dry herbs and spices in your own home without worrying about unwanted odours, bulky machines, and mouldy results. 

With Herb Dryers unique design, smart ventilation, and odour-preventing filter, you'll get beautifully dried herbs within 7 days.

Benefits:

High-Quality Uniform Drying
The Herb Dryer features a unique air circulation system that has undergone extensive testing to ensure constant air flow for high-quality and uniform drying.

Prevents the Spread of Mould
Mould spreads when there is moisture from herbs and plants are closed in a closed and unventilated area. Herb Dryer reduces the spread of mould due by generating a constant flow of clean, filtered air.

Completely Odour Free
Our odour filtering system prevents unwanted odours from the plants and herbs being dried, and can reduce the spread of allergens from the drying process.

Light-Weight, Compact, Easy to Store
The HerbDryer is foldable and easy to store. Its compact design makes it perfect for small spaces, like a small apartment or even a closet.

Quiet and Discreet
Herb Dryers are often very noisy and visible. Herb Dryer dries your herbs quietly and can work in small or closed spaces, allowing for very discreet use.

Size:
Diameter: 30 cm or 60cm
Height: 35 cm or 65cm

Model: ICG (Internal Circular Grille)

For supply and exhaust ventilation, air conditioning and hot-air heating systems.

Allows even air distribution.

Equipped with a mounting flange for easy mounting.

For mounting on to ceilings or walls.


Model: QBF (Quiet Box Fan)
Quiet Box Fan (QBF) fan design allows for supply and extract ventilation for areas/rooms with high requirements to low noise levels and limited mounting space. Units can be installed above ceilings or in loft spaces. Suitable for round ducts. The centrifugal impeller with back-curved blades is powered by means of 2-pole asynchronous motor with external rotor. The motors are equipped with built-in thermal overheating protection with automatic restart. 

Sizes/Types

100mm (4") - QBF100
125mm (5") - QBF125
150mm (6") - QBF150
200mm (8") - QBF200
250mm (10") - QBF250
315mm (12") - QBF315
Standard - S
UK Plug - Standard Model Only
Wattage
100mm (4") - 63w
125mm (5") - 63w
150mm (6") - 112w
200mm (8") - 170w
250mm (10") - 173w
315mm (12") - 221w
Air Flow (Free Air)
100mm (4") - 240m3/hr (67l/s)
125mm (5") - 330m3/hr (92l/s)
150mm (6") - 420m3/hr (117l/s)
200mm (8") - 730m3/hr (203l/s)
250mm (10") - 1300m3/hr (362l/s)
315mm (12") - 2150m3/hr (598l/s)
Sound Level dBA
100mm (4") - 33
125mm (5") - 35
150mm (6") - 36
200mm (8") - 38
250mm (10") - 41
315mm (12") - 43
Model: RD (Rigid/Solid Plastic Ducting)

A full range of white solid plastic ducting. The standardisation of diameters also allows fitting to all European ventilation equipment, ducting, grilles and extractor fans.

 

With a smooth inner surface, this reduces air resistance and increases the efficiency.

 

Supplied in 100,125 and 150mm connection sizes to suit most domestic ventilation installations and cut in convenient 350, 500, 1, 1,5 and 2m  lengths.

 

Model: RDCLIP (Plastic Duct Clips)

Ducting Clips are used for fitting plastic solid ducting to a wall or ceiling.

They are robust, versatile and easy to fit.

Plastic Duct Clips are lightweight with simple to fit.

*Design may change from the picture*

SA Extractor Fan Range Bathroom

SA is our wall/ceiling extractor fan perfect for any bathroom, utility or Kitchen, each unit has a back draught shutter attached to stop any unwated drafts from entering from outside.

IP Rating: IP24

Types/Spigot Size

SA100 - 100mm (4")
SA125 - 120mm (5")
SA150 - 150mm (6")

Models - Standard (S), Timer (T) & Humidistat (H)


Wattage
100 - 14w
125 - 16w
150 - 16w
Air Flow (Free Air)
100 - 97 m3/hr
125 - 183 m3/hr
150 - 290 m3/hr
Sound Level dBA (3m)
100 - 35
125 - 36
150 - 38
Model: SAHRU150 (Passive Heat Recovery)
Designed to work with inline fans already installed or purchased separately.
This will then provide adequate ventilation for rooms and will provide up to 75% heat recovery.

Eliminate mould and control condensation.
Spigots
6" 150mm


Model: SAS (Automatic Shutter Extractor Fan)

A distinctive feature of the SAS fan is the automatic shutters (Please allow 40 secounds to open and fully close).

This design is necessary to combat reverse traction and is indispensable for rooms where regular, but not constant ventilation is needed.

SAS is also has other options: timer & humidity sensor. 

This will help the unit with changes within the room and respond.

IP Rating: IP24


Types/Spigot Size

SAS100A - 100mm (4")
SAS125A - 120mm (5")
SAS150A - 150mm (6")

Models - Standard (S), Timer (T) & Humidistat (H)


Wattage
100 - 11w
125 - 15w
150 - 29w
Air Flow (Free Air)
100 - 85 m3/hr
125 - 130 m3/hr
150 - 230 m3/hr
Sound Level dBA (3m)
100 - 39
125 - 42
150 - 46
Model: SCT (Continuous dMEV)

Swiftair 4"/5” Axial Continuous Running Fan SCT

 

100mm / 125mm continuous running panel axial fan for bathrooms and kitchens.

Discreet styling with flat facia reducing the impact the fan has on interior design.

Suitable for wall or panel mounting using the appropriate fixing kit.

Designed to comply with Building Regulations for whole house system ventilation, this sleek fan can be used in a wet room under System 3 of Building Regulations Approved Document F.

This attractive fan is also very energy efficient.

 

Why choose continuous running fans?

Continuous running fans, like the Continuous range, have been designed to meet the requirements of the Building Regulations for bathrooms, kitchens, utility rooms and toilets (other models available).

The fan is designed to run all of the time, keeping homes fresh, healthy and free from condensation.

 

What does it do?

The fan is designed to run continuously at a very low rate and boost automatically when required.

The low running rate means it has extremely low noise levels.

 

How will it help?

This fan will help prevent the build up of moisture in the home by removing steam and odours.

This will help reduce the risk of black mould forming on walls and behind cupboards.


220-240 V/AC. 50Hz single phase powering a low energy motor.

These fans are double insulated and do not require an earth.

All wiring must comply with current IEE regulations.

 

IP Rating

IPX4


Types/Spigot Size

SCT100 - 100mm (4")
SCR125 - 120mm (5")

Models - Timer (T) & Humidistat (H)

Wattage
100 - 4/6w
125 - 6/8w

Air Flow (Free Air)
100 - 42/70 m3/h
125 - 55/100 m3/h
PA
100 - 11/15
125 - 6/12
Sound Level dB(A)
100 - 26/32
125 - 24/32

Model: SF (Inline Fan)

The SF range is an inline Axial Fan perfect for small carbon filters or just as a supply/extract fan. This model has a Bracket attached

 

UK Plug - No

 

Sizes/Types

100mm (4") - SF100

125mm (5") - SF125

150mm (6") - SF150

Timer - T

Standard - S

 

Wattage

100mm (4") - 15w

125mm (5") - 20w

150mm (6") - 25w

 

Air Flow (Free Air)

100mm (4") - 100m3/hr (28l/s)

125mm (5") - 150m3/hr (42l/s)

150mm (6") - 210m3/hr (59l/s)

 

Sound Level dBA

100mm (4") - 30

125mm (5") - 32

150mm (6") - 35

Model: SFP (Plate Fan)
The SFP range is a Commercial Plate Axial Fan perfect for Kitchens, Warehouses, Sports halls, and large areas where high extract rates are needed a low pressure
The SFP Comes in various sizes ranging from 230mm to 480mm

Types/Spigot Size

SFP200 - 230mm
SFP250 - 280mm
SFP300 - 330mm
SFP350 - 380mm
SFP400 - 430mm
SFP450 - 480mm


Pole

SFP200 - 2 Pole

SFP250 - 2 Pole

SFP300 - 2 Pole

SFP350 - 4 Pole

SFP400 - 4 Pole

SFP450 - 4 Pole

 

Wattage

SFP200 - 55w (0.25 A)
SFP250 - 80w (0.36 A)
SFP300 - 145w (0.66 A)
SFP350 - 135w (0.61 A)
SFP400 - 180w (0.82 A)
SFP450 - 250w (1.14 A)
Air Flow (Free Air)
SFP200 - 890 m3/hr
SFP250 - 1100 m3/hr
SFP300 - 2300 m3/hr
SFP350 - 2600 m3/hr
SFP400 - 3830 m3/hr
SFP450 - 4800 m3/hr
Sound Level dBA (3m)
SFP200 - 50
SFP250 - 60
SFP300 - 61
SFP350 - 62
SFP400 - 63
SFP450 - 64
Model: SI (Inline Fan)
The SI range is a compact inline Axial Fan perfect for small carbon filters or just as a supply/extract fan.
Spigots
The SI Fan has different inlet and outlet spigot diameters to enable attachment to a carbon filter with the outlet side  attaching to your ducting. 
UK Plug - EU/UK plug attached  
Sound Level dBA
100mm (4") - 35
125mm (5") - 36
150mm (6") - 38

Sizes/Types

100mm (4") - SI100
125mm (5") - SI125
150mm (6") - SI150
Timer - T
Standard - S
Wattage
100mm (4") - 14w
125mm (5") - 18w
150mm (6") - 22w
Air Flow (Free Air)
100mm (4") - 107m3/hr (30l/s)
125mm (5") - 190m3/hr (53l/s)
150mm (6") - 270m3/hr (75l/s)
Model: SL (Shower Light Grille)

Grille and light (optional white or chrome bezel included) with a built in LED Light (1.5w or 3w)

 

Fitting

Remove the Chrome/White part of the grille to show four fixing holes. Cut a hole in your ceiling and push the grille through.

Connect duct to the back of the grill.

Twist fit your Chrome/White bezel

Must Use a qualified electrician to wire to transformer/driver (provided).

 

Where to fit?

Grille/light can be mounted within the splash zone due to being 12v

Perfect for mounting directly over a shower or bath.

 

Light Fitting

4" - 3w LED MR16 - Cool White

5" 6" - 1.5w LED MR16- Cool White

Model: SNB (White Extractor Fan)

The SNB range is designed to complment stylish bathrooms, with an unobtrusive, sleek design.

IP Rating: IPX4

Types/Spigot Size

SNB100 - 100mm (4")

Models - Timer (T) & Humidistat (H)

Wattage
100 - 13w
Air Flow (Free Air)
100 - 88 m3/h

Sound Level dBA (3m)
100 - 37
PA
38


Model: SNI (Brushed Extractor Fan)

The SNI range is designed to complment stylish bathrooms, with an unobtrusive, sleek design.

IP Rating: IPX4

Types/Spigot Size

SNI100 - 100mm (4")

Models - Timer (T) & Humidistat (H)

Wattage
100 - 13w
Air Flow (Free Air)
100 - 88 m3/h

Sound Level dBA (3m)
100 - 37
PA
38


Model: SR (Semi Rigid Ducting)

An extremely flexible reinforced aluminium foil flexible supply or extract ventilation ducting.

Multi-ply aluminium and polyester laminate construction supported by a high tensile steel wire helix.

 

Model: SRD (Round Extractor Fan)
For constant or periodic exhaust ventilation of bathrooms, kitchens and other domestic compartments.

Case and impeller are made from the high-quality ABS-plastic, resistant to ultraviolet.

The motor is equipped with overheating protection.

Fixing to the mounting place is carried out by means of screws.

Types/Spigot Size

SRD100 - 100mm (4")
SRD125 - 125mm (5")
SRD150 - 150mm (6")

Models - Standard (S) & Timer (T)


Wattage
SRD100 - 14w
SRD125 - 18w
SRD150 - 22w
Air Flow (Free Air)
SRD100 - 107 m3/hr
SRD125 - 190 m3/hr
SRD150 - 270 m3/hr
Sound Level dBA (3m)
SRD100 - 35
SRD125 - 36
SRD150 - 38
Model: ST (Centrifugal Inline Fan)
The ST range is an inline Centrifugal Fan with attached bracket which can be used for supply or extraction.
This fan is perfect for longer duct runs and carbon filters.
UK Plug - Standard Model Only

Sizes/Types

100mm (4") - ST100
Standard - S
Wattage
100mm (4") - 20w
Air Flow (Free Air)
100mm (4") - 110m3/hr (30l/s)
Sound Level dBA
100mm (4") - 35
Model: STUBE r2 (Centrifugal Inline Tube Fan)
Because of the metal casing there the perfect solution for the installation in exhaust ventilation systems in humid premises such as bathrooms, kitchens etc.

A dynamic balanced impeller with backward curved blades balanced in two planes.
Overheating protection with automatic restart.

Maintenance-free ball-bearings used with motors and designed for at least 40000 hours operation.

Sizes/Types

100mm (4") - STUBE100-R2
125mm (5") - STUBE100-R2
150mm (6") - STUBE100-R2
200mm (8") - STUBE100-R2
250mm (10") - STUBE100-R2
315mm (12") - STUBE100-R2
UK Plug - Yes - with wired Controller
Wattage
100mm (4") - 68w
125mm (5") - 70w
150mm (6") - 125w
200mm (8") - 160w
250mm (10") - 165w
315mm (12") - 165w
Air Flow (Free Air)
STUBE100 - 300 m3/h
STUBE125 - 400 m3/h
STUBE150 - 600 m3/h
STUBE200 - 900 m3/h
STUBE250 - 1000 m3/h
STUBE315 - 1500 m3/hr
Sound Level dBA
100mm (4") - 49
125mm (5") - 49
150mm (6") - 49
200mm (8") - 51
250mm (10") - 52
315mm (12") - 53
Model: SVU400HT MEV (Whole House Extract Unit)

The SVU400 central fan is designed for the continuous and quiet ventilation of rooms. It can be used in houses and flats, as well as in conference rooms, offices and public buildings.

The unit is equipped with an energy-saving motor, which enables operation at three performance levels. Its construction allows the connecting of up to seven inlet ducts with a diameter of Ø75 mm, and one Ø125 mm duct intended for connecting a extractor hood.

The CVU400 is comes with humidistat, which automatically adjusts the efficiency of the fan to the prevailing humidity. The simple device design allows for its quick installation and maintenance (cleaning) without using complicated tools.

The design of the CVU central fan allows it to be mounted on the wall or ceiling in both horizontal and vertical positions.

 

The humidity sensor has an operating range of 0% to 100%. The humidity level should be adjusted on the front part of the fan casing. The fan will start in trickle. When the humidity rises above the value set, the fan will automatically increase the speed to Boost (Full Speed). After the humidity drops below the set value, the fan will return to operation in trickle.


Wattage
54/55/60

Air Flow (Free Air)
Speed 1 – 265 m3/hour
Speed 2 – 360 m3/hour
Speed 3 – 415 m3/hour
PA
435/495/535

Sound Level dBA
44/49/56 dB(A)
IP
X2
Model: SW-3IN145-COOL