Ducting

Ducting

Model: SW-INS (Insulated Ducting)
Fully flexible insulated ducting is ideal for use in low and medium pressure ventilation and air conditioning systems where attenuation of duct borne noise is required.

A high quality, flexible aluminium ducting with a layer of noise reducing insulation
that not only dampens the noise of rushing air through the ducting but also helps
to muffle fan noise when attached.

For best results use on both the input and output sides of your extractor fan.
Can be easily cut at the required length
Supplied in 5 and 10 metre lengths
Inner duct Aluminium Ducting.
Fibreglass 25mm*
Fully flexible insulated ducting is ideal for use in low and medium pressure ventilation and air conditioning systems where attenuation of duct borne noise is required.

A high quality, flexible aluminium ducting with a layer of noise reducing insulation
that not only dampens the noise of rushing air through the ducting but also helps
to muffle fan noise when attached.

For best results use on both the input and output sides of your extractor fan.
Can be easily cut at the required length
Supplied in 5 and 10 metre lengths
Inner duct Aluminium Ducting.
Fibreglass 25mm*
Model: RD (Rigid/Solid Plastic Ducting)

A full range of white solid plastic ducting. The standardisation of diameters also allows fitting to all European ventilation equipment, ducting, grilles and extractor fans.

 

With a smooth inner surface, this reduces air resistance and increases the efficiency.

 

Supplied in 100,125 and 150mm connection sizes to suit most domestic ventilation installations and cut in convenient 350, 500, 1, 1,5 and 2m  lengths.

 

A full range of white solid plastic ducting. The standardisation of diameters also allows fitting to all European ventilation equipment, ducting, grilles and extractor fans.

 

With a smooth inner surface, this reduces air resistance and increases the efficiency.

 

Supplied in 100,125 and 150mm connection sizes to suit most domestic ventilation installations and cut in convenient 350, 500, 1, 1,5 and 2m  lengths.

 

Model: ALU (Aluminium Flexible Ducting)

An extremely flexible reinforced aluminium foil flexible supply or extract ventilation ducting.

Multi-ply aluminium and polyester laminate construction supported by a high tensile steel wire helix.

 

An extremely flexible reinforced aluminium foil flexible supply or extract ventilation ducting.

Multi-ply aluminium and polyester laminate construction supported by a high tensile steel wire helix.

 

Phonetic Ducting Ultra Silent

The NON-WOVEN PMP BLACK consists of a Polypropylene fabric cloth inner duct, thermically and acoustically insulated with a Polypropylene insulation layer and provided with a black polyester outer jacket.  The inner duct is hydrophobic and Anti-Bacterial.

APPLICATION:

Air-conditioning systems

Air supply systems

Preventing condensation in air ventilation systems

Decreasing of machine noises

 

SPECIFICATIONS  PRESSURE LOSS (STRAIGHT DUCT) Article code: SBIPMPB{Ø}NW 

 Temperature range: -30 ⁰C to 140 ⁰C

 Operating pressure: up to +2500 Pa Operating air velocity: max. 25 m/s Min.

 bending radius: 0.54 x Ø + 25mm

Standard diameter range: 102 – 406 mm

Standard length: 3, 6 and 10 mtr  

 

CONSTRUCTION 

Inner duct: Non-woven Polypropylene fabric cloth

Insulation blanket PP: 25mm, 16kg/m³

Outer jacket: Poly laminate R-value glass wool: 0.55 m² K/W (ASTM C177-76)

Appearance: Black            

The NON-WOVEN PMP BLACK fulfils all the requirements and are classified as specified within EN 13180: Ventilation for buildings – Ductwork - Dimensions and mechanical requirements for flexible ducts.

 

The NON-WOVEN PMP BLACK consists of a Polypropylene fabric cloth inner duct, thermically and acoustically insulated with a Polypropylene insulation layer and provided with a black polyester outer jacket.  The inner duct is hydrophobic and Anti-Bacterial.

APPLICATION:

Air-conditioning systems

Air supply systems

Preventing condensation in air ventilation systems

Decreasing of machine noises

 

SPECIFICATIONS  PRESSURE LOSS (STRAIGHT DUCT) Article code: SBIPMPB{Ø}NW 

 Temperature range: -30 ⁰C to 140 ⁰C

 Operating pressure: up to +2500 Pa Operating air velocity: max. 25 m/s Min.

 bending radius: 0.54 x Ø + 25mm

Standard diameter range: 102 – 406 mm

Standard length: 3, 6 and 10 mtr  

 

CONSTRUCTION 

Inner duct: Non-woven Polypropylene fabric cloth

Insulation blanket PP: 25mm, 16kg/m³

Outer jacket: Poly laminate R-value glass wool: 0.55 m² K/W (ASTM C177-76)

Appearance: Black            

The NON-WOVEN PMP BLACK fulfils all the requirements and are classified as specified within EN 13180: Ventilation for buildings – Ductwork - Dimensions and mechanical requirements for flexible ducts.

 

Login