all products

all products

T-Roks (Bigger and Heavier Flowers)

Stimulate and enhance flowering and improve size and quality of yield.

T-Roxs is an enhancer that can be used from week 2 of flowering for a maximum of 10 days.

Designed to enhance flowering when used during this specific period. A safe, natural material that’s based on plant extracts – without artificial PGRs.

T-Roks pushes flower bud formation to the limit at its vital early stage of growth, meaning early formed flowers end up bigger and heavier.


Benefits

Improve size and quality of flower yield.

Reduced growing periods.

Natural extracts.


Directions:

Ensure all equipment is CLEAN and free of residues from previous use.

SHAKE OR STIR THOROUGHLY before SLOWLY adding the required quantity to fresh solution.

MIX WELL before use and make up a solution for one week’s use, then top up as necessary.

 

Application:

End of 2nd Week (Flower)

10 Days Max - 1.5ml/L

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

0.27% as MgO

0.17% Mn

Specific L-Amino acid hormone analogues

1.1% Free Amino acids from plant fermentation

0.6% Humic acid

Betaines

0.15% Fulvic acid

Oxo-pyro-glutamic acid

2.2% Natural algal extract, rich in gibberellins and cytokinins

NPK: 2.3-2.9 (1.8 as PHOSPHITE) – 4.1

Lightning Roots (Root Stimulator)

Supercharge your roots with Lightning Roots!

Turbo-charged formula to speed-up root growth with increased water & nutrient uptake thanks to longer, heavier and more efficient roots.

Lightning Roots uses entirely natural components to tilt hormone production in favour of root growth.

Bigger roots take up nutrients more efficiently, absorb water more effectively and provide better anchorage for your plant.

A safe, natural material that’s based on plant extracts – without artificial PGRs. Its oligosaccharides work in conjunction with other sugars and amino acids to stimulate your plant’s root zone.


Benefits

Increase stress resistance.

Epic root growth.

Faster growth development.


Directions:

Ensure all equipment is CLEAN and free of residues from previous use.

SHAKE OR STIR THOROUGHLY before SLOWLY adding the required quantity to fresh solution.

MIX WELL before use and make up a solution for one week’s use, then top up as necessary.

 

Application:

Weeks 1-4 (Veg)

Weeks 1-2 (Flower)

1ml/L

 

You can use beyond if needed

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

0.15% Amino Acids

8.6% Plant extracts

0.9Lignin salts

3%Glucose surfactant

0.5% Glycerol

Humic Acid<0.1%

Lignosulphonates 0.8%

Chaos (30% Booster)

Chaos from Swiftair is the formless matter supposed to have existed before the creation of the universe. 

Fortunately, the only creation this booster will be part of is the battle to create excessive amounts of weight to your crop.

A blooming formula (for weeks 6-7)

Plant-sourced amino acids, humates, lignins and sugars to enhance yield, health and flavour.

Specifically designed for use late-on in the growing cycle, it stimulates bulking up of flower components over their final 3 week.

Based on plant extracts without artificial PGRs. Using bioactivated Potassium in both Thiosulphate and Phosphite forms, combined with specific amino acids and other plant extracts.

 

Benefits

Late Mass builder.

 Plant booster.

 Increases yield up to 30%.

 

Directions:

Ensure all equipment is CLEAN and free of residues from previous use.

SHAKE OR STIR THOROUGHLY before SLOWLY adding the required quantity to fresh solution.

MIX WELL before use and make up a solution for one week’s use, then top up as necessary.

 

Application:

Use only in either week 6 or 7 of flowering:

Use 2ml/L - for 1 week only.

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

N – 7.1%

P2O5 – 4%

K2O – 8%

MgO – 2.0%

Amino Acids – 2.3%

Model: SW-SILF  (Acoustic AC/EC Inline Fan)

Swiftair single speed or variable (EC Only) sound insulated fans are designed and constructed to minimalize sound output at range which makes them the ideal grow room inline fans for where noise sensitivity is a priority.

Airflow capabilities:

Powerful with engineered high-quality motors run extremely quiet while moving a very large amount of air through either a 150mm, 200mm, 250mm and 315mm outlet. The outer casing functions as a silencer and has a thick layer of insulating foam-lining around its inside, providing outstanding sound protection. 

Swiftair fans can be suspended/ installed in locations that may be unsuitable to consider other, heavier, cabinet/box type acoustic fans. 

The speed controller (EC Only) offers the ability to reduce air-flow levels when it may be preferable, providing added flexibility and saving money on additional fan-controller units!
These fans are highly reliable, durable and overheating is prevented by a thermal switch, so peace of mind can be maintained at all times.

 

Sizes/Types

150mm (6")

200mm (8")

250mm (10")

315mm (12")

 

AC - UK Plug Attached

EC - Speed Controller and UK Plug

 

Wattage

 

200mm (8") - 120w AC

250mm (10") - 153w AC

315mm (12") - 334w AC

 

150mm (6") - 41w EC

200mm (8") - 120w EC

250mm (10") - 153w EC

315mm (12") - 334w EC

 

Air Flow (Free Air)

 

150mm (6") - 550m3/hr (150 l/s)

200mm (8") - 1000m3/hr (277 l/s)

250mm (10") - 1660m3/hr (461 l/s)

315mm (12") - 2760m3/hr (766 l/s)

 

To calculate how big a fan you will require: 

Simply multiply the length x width x height of your grow room in metres which will give you the cubic capacity of your room and then multiply that value by either 30 or 60 which is the minimum and maximum air changes required per hour for optimum ventilation in your grow room.

For example : A grow room measuring 2mtrs x 2mtrs x 2mtrs = 8mtrs cubed x30 air changes an hour = 240mtr cubed per hour will need to be ventilated ..as a rule we recommend buying a slightly larger capacity fan than you need, to allow for summer increases in temperature and or using a Carbon filter. 

 

Phonetic Ducting Ultra Silent
The SW-PHON 10m Phonetic Ducting Ultra Silent includes a Polypropylene fabric cloth inner duct, thermally insulated layer and a black Alu/PVC outer jacket designed for use in air-conditioning systems, air supply systems, ventilation systems and machine noise reduction.
It offers a maximum 2,500 pascals operating pressure and 25 m/s maximum air velocity with a standard diameter range of 102 to 406 mm and a fixed length of 5m.
PK Rage 18/20 Nutrient

A 3-in-1 concentrated formula

Nutrition in flowering plants, maximises flower buds and enhances flowers.

PK Rage is a biostimulant that enhances and extends the flowering period. 

More concentrated than most competitor products yet still a true solution, with no suspended insolubles.


A safe and natural product without PGR’s, it is uniquely concentrated in order to yield unstoppable results.

 

Benefits

Triggers an increase in flowering sites.

Causes fruits to swell-up in size.

Increases the weight.

Can be used with any base nutrient.

 

Direction of Use

Week 4-5 - 0.3ml/L

Week 6-7 - 0.5ml/L

 

Please make sure you check your EC levels

0.8-1.3 for seedlings or 0.5-1.3 for clones,

1.3-1.7 under vegetative phase

1.7-2.2 during flowering 

 

Contains:

Calcium – 0.5%

Magnesium – 0.3%

Phosphorus (P2O5) – 22%

Potassium (KO) – 17%

Model: SW-MMAKER-13L (Ultrasonic Humidifier)

The Swiftair Ultrasonic Humidifier 13L Tank

- 600ml per hour

- Mist Nozzle

- Controller

- Control the amount of humidity

- Timer (1 to 12 hours)

- Water Shortage Shutdown

- 48w / 50hz / 220-240v

 

 

Model: SW-MMAKER-5L (Ultrasonic Humidifier)

The Swiftair Ultrasonic Humidifier 5L Tank

- 300ml per hour

- Control the amount of humidity

- Timer (1 to 12 hours)

- Water Shortage Shutdown

- 28w / 50hz / 220-240v

 

 

Model: SW-AD (Door Hatch)
For access to fans, pipes or any items that require to be hidden.
Designed for wall or ceiling mounting.
Open and close by press.
The possibility of universal installation for the left or right-side opening.
Can be used in high-humidity.
Made of high-quality ABS-plastic.

SW-AD1515 - 168 x 168mm (Door Dimensions 146 x 146)
SW-AD2020 - 218 x 218mm (Door Dimensions 196 x 196)
SW-AD3030 - 318 x 318mm (Door Dimensions 296 x 296)
SW-AD3535 - 368 x 368mm (Door Dimensions 346 x 346)

Thickness - 24mm (including flange)

Mounted with glue or cement

Colour: White
Model: SW-TRIMBIN-TK
Sold Out
Trim King Work Tray Product Details:
the Trim King Work Tray is a clever and ergonomic designed tray that makes trimming process become - quick and comfortable. Trim King brings you stress free trimming sessions and high yields. Ultra portable the Trim King will keep your trimming area efficient and tidy.

Designed so it can put on a table, your lap or sofa – allowing you to manicure your flowers, herbs and garden cuttings in comfort, as the 150 Micron Maya Mesh Screen below – collects pollen and separates seeds below in the pollen collection tray.

Trim King Work Tray benefits include:
1 top bin with 150 micron Maya Mesh Screen
1 bottom bin pollen collection tray
Moulded high walls to keep your work contained
Constructed from recycled plastic
Portable and easy to clean
Model: SW-PMB
Exhaust Portable fan: it is widely used in a bad air environment, such as basement, tunnel, warehouse, mining ventilation equipment, dust and hot gas generated by welding and smoke exhaust, etc. 


8" 200mm - 120w - 1500m3/hr - UK plug
12" 300mm - 322w - 3600m3/hr - UK plug
16" 400mm - 1100w - 5760m3/hr - Needs Wiring
20" 500mm - 2000w - 12000m3/hr - Needs Wiring

Ducting can be attached if required 
Model: SW-CLHOOD (Cool Hood Reflector)
The Cool Hood reflector is sealed with slide-in gasketed glass constructed with heavy duty pre-galvanized steel

-Made from premium highly reflective aluminum
-pre-wired lamp cord
-Comes with built-in socket, and hanging hooks
-Can be connected straight to a Ballast
-Bulb in picture not included

Spigot Size - L x W x H

150mm (6")  - 59cm x 42.5 x 18cm
Wattage
250w, 400w & 600w

Bulb Fitting

E40 Screw Fitting
Model: SW-TUBE (Cool Tube Reflector)
The cool tube reflector is perfect to keep those temperatures down.

-Internal and external reflectors included
-Made from premium highly reflective aluminum
-Comes with built-in socket and pre-wired lamp cord
-The lamp is not included in the system

5" 125mm - 45cm Long
6" 150mm - 65cm Long
8" 200mm - 75cm Long

Spigot Size

125mm (5") - SW-TUBE-5125
150mm (6") - SW-TUBE-6150
200mm (8") - SW-TUBE-8200
Wattage
250w, 400w & 600w - 5" & 6"
250w, 400w, 600w & 1000w - 8"

Bulb Fitting

E40 Screw Fitting

Model: SW-LED
Veg and Bloom Switch 
3 options
Just Veg 
Just Bloom 
Both 
Available in 600w,1200w,1500w or 2000w 

600w
Actual power: 105W
PPFDμmol/(m2·s): 329
Lumen: 9600lm

1200w
Actual power: 230W
PPFDμmol/(m2·s): 975
Lumen: 20000lm

1500w
Actual power: 290W
PPFDμmol/(m2·s): 1082
Lumen: 22200lm

2000w
Actual power: 320w
PPFDμmol/(m2·s): 1435.7
Lumen: 24853lm


Model: SW-MAG
The Magnetic Ballast is supplied with a flying IEC lead which enables you to add any reflector fitted with a universal IEC socket. 

The Magnetic ballast can be used with any 250w, 400w & 600w bulb.

Please always make sure you use the right bulb for the wattage of the ballast.

Magnetic Ballast will get very hot

Types

Magnetic
Wattage
250w - SW-MAG-250W
400w - SW-MAG-400W 
600w - SW-MAG-600W 

Bulb Options

Can be used with MH or HPS
UK Plug - UK plug (Supplied)
Model: SRD (Round Extractor Fan)
For constant or periodic exhaust ventilation of bathrooms, kitchens and other domestic compartments.

Case and impeller are made from the high-quality ABS-plastic, resistant to ultraviolet.

The motor is equipped with overheating protection.

Fixing to the mounting place is carried out by means of screws.

Types/Spigot Size

SRD100 - 100mm (4")
SRD125 - 125mm (5")
SRD150 - 150mm (6")

Models - Standard (S) & Timer (T)

Wiring diagram 


Wattage
SRD100 - 14w
SRD125 - 18w
SRD150 - 22w
Air Flow (Free Air)
SRD100 - 107 m3/hr
SRD125 - 190 m3/hr
SRD150 - 270 m3/hr
Sound Level dBA (3m)
SRD100 - 35
SRD125 - 36
SRD150 - 38
Model: QBF (Quiet Box Fan)
Quiet Box Fan (QBF) fan design allows for supply and extract ventilation for areas/rooms with high requirements to low noise levels and limited mounting space. Units can be installed above ceilings or in loft spaces. Suitable for round ducts. The centrifugal impeller with back-curved blades is powered by means of 2-pole asynchronous motor with external rotor. The motors are equipped with built-in thermal overheating protection with automatic restart. 

Sizes/Types

100mm (4") - QBF100
125mm (5") - QBF125
150mm (6") - QBF150
200mm (8") - QBF200
250mm (10") - QBF250
315mm (12") - QBF315
Standard - S
UK Plug - Standard Model Only
Wattage
100mm (4") - 63w
125mm (5") - 63w
150mm (6") - 112w
200mm (8") - 170w
250mm (10") - 173w
315mm (12") - 221w
Air Flow (Free Air)
100mm (4") - 240m3/hr (67l/s)
125mm (5") - 330m3/hr (92l/s)
150mm (6") - 420m3/hr (117l/s)
200mm (8") - 730m3/hr (203l/s)
250mm (10") - 1300m3/hr (362l/s)
315mm (12") - 2150m3/hr (598l/s)
Sound Level dBA
100mm (4") - 33
125mm (5") - 35
150mm (6") - 36
200mm (8") - 38
250mm (10") - 41
315mm (12") - 43

Login